Investigation of Solid Dispersion Technique in Improvement ofPhysicochemical Characteristics of Ibuprofen Powder Ibuptofen physicochemical characteristics
Iranian Journal of Pharmaceutical Sciences,
卷 3 编号 2 (2007),
1 abril 2007
,
第 69-76 页
https://doi.org/10.22037/ijps.v3.40344
摘要
Ibuprofen solid dispersions were prepared by the solvent and fusion-solventmethods using polyethylene glycol (PEG), polyvinylpyrrolidone (PVP), eudragit RSPO, eudragit RLPO and hydroxypropylmethylcellulose (HPMC) as carriers toimprove physicochemical characteristics of ibuprofen. The prepared solid dispersionswere evaluated for the flowability, solubility characteristics and dissolution behavior.Flowability studies of powders showed that solid dispersion technique improve flowproperties compared with the physical mixtures. Solid dispersion technique foundto be effective in increasing the aqueous solubility of ibuprofen. The dissolution ofibuprofen and polymers (PVP, HPMC, eudruagit and PEG-6000) were investigatedusing UVspectroscopy. Dissolution was carried out in phosphate buffer (pH 6.8)using a standard USPII dissolution apparatus. In vitrodissolution studies showedthat in the dispersion systems containing eudragit or HPMC, dissolution of ibuprofenwas retarded, which attributed to ionic interaction and gel forming, respectively. Butsolid dispersion containing PEG, as a carrier, gave faster dissolution rates than thephysical mixtures. Finally, solid dispersion of ibuprofen:PEG 6000 prepared in 1:1.5ratio showed excellent physicochemical characteristics and was found to be describedby the zero order kinetic, and was selected as the best formulation in this study.
- Dissolution
- Flowability
- Ibuprofen
- PEG
- Solid dispersion
##submission.howToCite##
参考
[2]Chowdary KPR, Srinivas L. Physical stabilityand dissolution rate of ibuprofen suspensionformulated employing its solid dispersion. IndianJ Pharm Sci2000; 62: 253-6.
[3]Khan GM, Jiabi Z. Preparation, characterizationand dissolution studies of ibuprofen soliddispersion using polyethylene glycol, talc andPEG-talk as dispersion carriers. Drug Dev IndPharm1998; 24: 455-62.[4]Dehghan MHG, Jafar M. Improving dissolutionof Meloxicam using solid dispersions. Iranian JPharm Res2006; 4: 231-8.
[5]Abu TMS. Solid dispersion of poorly watersoluble drugs: Early promises, subsequentproblems and recent breakthroughs. J Pharm Sci1999; 88: 1058-66.
[6] Ghebremeskel AN, Vemavarapu C, Lodaya M.Use of surfactants as plasticizers in preparingsolid dispersions of poorly soluble API: Selectionof polymer-surfactant combinations usingsolubility parameters and testing theprocessability. Int J Pharm2007; 328: 119-29.
[7]Ohara T, Kitamura S, Kitagawa T, Terada K.Dissolution mechanism of poorly water-solubledrug from extended release solid dispersionsystem with ethylcellulose and hydroxypropyl-methylcellulose. Int J Pharm2005; 302: 95-102.
[8]Sadeghi F, Afrasiabi Garekani H, Ghodsi A.Evaluation of solid dispersion systems ofacetaminophen and ethyl cellulose, eudragit RSor RLand the effect of solvent used in preparationof these systems on characteristic of matrices.Pharm Sci2006; 1: 47-54.
[9]Himasankar K, Murali Mohan Babu GV, Krishna-babu PSS, Prasad DS, Rao LN, Raman Murthy KV. Studies of the solid dispersion system ofglizizide.Indian J Pharm Sci 2002; 64: 433-9.
[10]Khan GM, Bi Zhu J. Ibuprofen release kineticsfrom controlled-release tablets granulated withaqueous polymeric dispersion of ethylcellulose II:Influence of several parameters and coexcipients.J Control Release1998; 56: 127-34.
[11]British pharmacopeia. Vol. 1. London: Thestationery Office, 2004; pp. 1009-10.
[12]Dabbagh MA, Ford, JL, Rubinstein MH, HoganJE, Rajabi-Siahboomi AR. Release of propranololhydrochloride from matrix tablet containingsodium carboxymethylcellusoe and hydrox-ypropylmethylcellulose. Pharm Dev Techno1999;3: 313-24.
[13]Habib MJ, Venkataram S, Hussain MD.Fundamentals of solid dispersions, In:Pharmaceutical solid dispersion technology,Lancaster: Technomic, 2001; pp. 16-26.
[14]Aiache JM, Beyssac E. Powders as dosage forms,In: Swaibrick J, (editor). Encyclopedia ofpharmaceutical technology. New York: MarcelDeker, 2002; pp. 2265-77.
[15]Erweka, Instruction manual, granulate flow Tester,type GT, 2001.
[16]Marshall K. Compression and consolidation ofpowdered solids. In: Lachman L, (editor). Thetheory and practice of industrial pharmacy.Philadelphia: Lea and Febiger, 1986; pp. 67-71.
[17]Heun G, Lambov N, Groning R. Experimental andmolecular modeling studies on interactionsbetween drugs and eudragit RL/RS resins inaqueous environment. Pharmacutica ActaHelvetica 1998; 73: 57-62.[18]Crowder TM, Hickey AJ. The physics of powderflow applied to pharmaceutical solid. PharmTechnol, 2000; 24: 50-8.
[19]Wells J. Pharmaceutical preformulation: Thephysicochemical properties of drug substances. In:Aulton ME (editor). Pharmaceutics, the scienceof dosage forms, 2ndedition. London:ChurchillLivingstone: 2002; pp. 113-38.
[20]Ghosh LK, Ghosh NC, Chatterjee M, Gupta BK.Product development studies on the tabletformulation of ibuprofen to improve bioavail-ability. Drug Dev Ind Pharm1998; 24: 473-7.
[21]Ritschel WA, Kearns GL. Handbook of basicpharmacokinetics. 5thedition. Washington:American Pharmaceutical Association. 1999; p.491.
- 摘要 ##plugins.themes.ojsPlusA.frontend.article.viewed##: 102 ##plugins.themes.ojsPlusA.frontend.article.times##
- IJPS_Volume 3_Issue 2_Pages 69-76 (English) ##plugins.themes.ojsPlusA.frontend.article.downloaded##: 25 ##plugins.themes.ojsPlusA.frontend.article.times##