The Effect of Rotation Speed and Time of Milling on Synthesisand Properties of Fluoridated Hydroxyapatite Biomaterial Synthesis of fluorhydroxyapatite nanopowder
Iranian Journal of Pharmaceutical Sciences,
Vol. 4 No. 3 (2008),
1 July 2008
,
Page 201-208
https://doi.org/10.22037/ijps.v4.41129
Abstract
Synthetic hydroxyapatite (HA) is the most helpful because of its similarity to natural bone in both crystalline structure and chemical composition. Recently,fluoridated hydroxyapatite (FHA) has been developed in dental and orthopedic application because it has lower solubility than pure HA, while maintaining the comparable bioactivity and biocompatibility. The aim of this study was to synthesis and characterizes FHAnanopowder via mechanochemical activation method. Also the effect of milling time and rotation speed on its properties was investigated.Calcium hydroxide, phosphorous oxide and calcium fluoride powder were used for synthesis of FHA. The math ratio of balls to reactant was 30. Mechanochemical reaction was performed in the planetary ball mill at two rotating speed 300 and 250rpm. Zirconia ball and zirconia vial were used to perform the mechanochemicalprocess. X-ray Diffraction, FTIR spectroscopy and Scanning Electron Microscopy were utilized to characterize FHAnanopowder. The results showed that the synthesis of FHAafter 6 h ball milling at 300 rpm or 10 h milling at 250 rpm was complet.
- Crystallite size
- Fluoridated hydroxyapatite
- Mechanochemical activation
- Milling time
- Nanopowder
- Rotation speed.
How to Cite
References
[2]Hench LL, Wilson J. Introduction to bioceramics.Singapore: World Scientific, 1993.
[3]Ranter BD, Hoffman AS, Schoen FJ, Lemons JE. Biomaterials science. An introduction to materials in medicine. San Diego: Academic Press, 1996; p. 484.
[4]Amjad Z. Calcium phosphates in biological and industrial systems. Boston: Kluwer Academic Publishers, 1998; pp. 67-83.
[5]Vaughan J. The physiology of bone. Oxford:Clarendon Press, 1981; p. 96.
[6]Gross KA, Rodri´guez-Lorenzo LM.Mechanochemical hydrothermal synthesis and characterization of fluoridated hydroxyapatite ,Biomaterials2004; 25: 1385.
[7]Overgaard S, Lind M, Grundvig H, Biinger C,Soballe K. Hydroxyapatite and fluorapatite coatings for fixation of weight loaded implants.Clin Orthop Rel Res1997; 336: 286-96.
[8]Slosarczyk A, Stobierska E, Paszkiewicz Z,Gawlick M. Calcium phosphate materials prepared from precipitates with various calcium:Phosphorus molar ratios. J Am Ceram Soc1996;79: 2539-44.
[9]Posner AS. The mineral of bone. Clin Orthop1985; 200: 87-99.
[10]Moreno EC, Kresak M, Zahradnik RT. Fluoridated hydroxyapatite solubility and caries formation.Nature1974; 247: 64-5.
[11]Legeros RZ, Silverstone LM, Daculsi G, Kerebel LM. In vitrocaries-like lesion formation in F-containing tooth enamel. J Dent Res1985; 62:138-44.
[12]Kim W, Zhang QW, Saito F. Mechanochemical synthesis of hydroxyapatite from Ca(OH)2-P2O5and Ca(OH)2-P2O5 mixtures. J Mater Sci2000;35: 5401-5.
[13]Rodri´guez-Lorenzo LM, Hart JN, Gross KA.Influence of fluorine in the synthesis of apatites.Synthesis of solid solutions of hydroxy-fluotapatite. Biomaterials2003; 24: 3777-85.
[14]Suchanek WL, Yoshimura M. Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants. J Mater Res 1998; 13: 94-117.
[15]Rhee SH. Synthesis of hydroxyapatite via mechanochemical treatment. Biomaterials2002,23: 1147.
[16]Gutman E. Mechanochemistry of Materials.Cambridge: International Science Publishing,1997.
[17]Williamson K, Hall WH. X-ray line broadening from filed aluminium. Acta Metall1953; 1: 22-31.
[18]Nikcevic I, Jokanovic V, Mitric M, Nedic Z,Makovec D, and Uskokovic D. Mechanochemi-cal synthesis of nanostructured fluorapatite/fluorhydroxyapatite and carbonated fluorapatite/fluorhydroxyapatite. J Solid State Chem2004;177: 2565-74.
[19]Nyquist RA, Kagel RO. Infrared spectra of inorganic compounds. New York: Academic Press, 1971; p. 493.
[20]Nakamoto K.Infrared and Raman spectra of inorganic and coordination compounds. NewYork: Wiley, 1978.
- Abstract Viewed: 65 times
- IJPS_Volume 4_Issue 3_Pages 201-208 Downloaded: 17 times